Maintenance Oil for wooden floors – matt, satin, anti-slip R9 or white transparent
(excl. btw €39,26)
Osmo Maintenance Oil refreshes oiled and hardwax-oiled wooden floors, stairs and furniture. Choose 3079 Matt, 3081 Satin, 3098 Anti-Slip R9 or 3440 White Transparent for periodic care of the existing finish.
- Buy 3 for €46,55 each and save 2%
- Buy 6 for €46,08 each and save 3%
- Buy 24 for €45,13 each and save 5%
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen met Klarna
- More information? Contact us about this product
Osmo Maintenance Oil for wooden floors, stairs and furniture
Osmo Maintenance Oil refreshes an existing oil or hardwax oil finish. It is intended for surfaces that have become dull through use while the protective finish remains present and the bare wood is not exposed.
Timely maintenance helps restore the appearance and protection without immediately sanding the entire floor. Choose the version that matches the colour and sheen of the existing finish.
Which maintenance oil should you choose?
-
3079 Clear Matt: maintains a matt appearance.
-
3081 Clear Satin: maintains a soft satin sheen.
-
3098 Clear Semi-Matt Anti-Slip R9: provides a slip-resistant finish and requires a separate application method.
-
3440 White Transparent Satin: contains white pigment for maintaining a compatible white finish.
The wood species and previous treatment influence the result. Always test first, particularly when using the white version or changing the sheen.
Suitable for periodic maintenance
Osmo Maintenance Oil is suitable for compatible oiled and waxed wooden floors, parquet, stairs and furniture surfaces. It can also refresh heavily used floors.
If the wood is bare, rough or greyed, maintenance oil alone is insufficient. The surface requires sanding and refinishing with a suitable Polyx-Oil.
Maintenance oil and weekly cleaning
Maintenance oil supplements care of the protective finish. It does not replace normal cleaning.
For weekly hygienic cleaning, we recommend Eco Multi Cleaner. Apply Maintenance Oil when the condition of the finish calls for it, after thorough cleaning and complete drying.
Preparation
The surface must be clean, dry and free of dust. Where necessary, clean heavily soiled flooring with Osmo Intensive Cleaner 8019, damp-wipe with clean water and allow to dry completely.
Osmo Maintenance Oil is ready to use. Do not dilute. Shake or stir thoroughly before application.
Applying 3079, 3081 and 3440
-
Spread a very thin, even coat along the wood grain.
-
Work it into the surface with a white pad, manually or using a suitable machine.
-
Remove excess oil and carefully eliminate visible application marks.
-
Allow to dry with good ventilation.
A lint-free cloth can be used on smaller areas. One thin application to the cleaned surface is normally sufficient.
Applying 3098 Anti-Slip R9
Apply this version thinly and evenly using a suitable Osmo microfibre roller only.
Do not rub in or buff 3098 with a single-disc machine. Follow this separate method to obtain the intended slip-resistant finish.
Drying time and coverage
-
Drying time: approximately 3–5 hours at 20–23 °C and 50–65% relative humidity with good ventilation.
-
Coverage: approximately 40–60 m² per litre for one thin application.
Lower temperatures and higher humidity extend drying times. Actual coverage depends on the surface and the condition of the existing finish. Check that the surface is sufficiently dry before use.
Safe handling
Work in a well-ventilated area. Avoid contact with eyes, skin and clothing, and keep out of reach of children.
Oil-soaked cloths and pads may self-ignite through self-heating. Wash used cloths immediately or store them in an airtight, suitable metal container. Follow the product label and safety data sheet.
Technical information
| Brand | Osmo |
| Article code | 13024 |
| EAN | 4006850761227 |
average of 1 review(s)
bestellen dit altijd samen met de onderhoudswas. wit werkt goed en geeft goede beschermende laag