(excl. btw €27,23)
Osmo TopOil is a durable oil-and-wax finish for wooden kitchen worktops, tables, furniture and chopping boards. Suitable for food-contact surfaces once fully dry. Choose your preferred colour and sheen.
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen met Klarna
- More information? Contact us about this product
Osmo TopOil for wooden worktops and furniture
Osmo TopOil is a durable oil-wax finish for wooden kitchen worktops, tabletops, desks, shelving, furniture and other frequently used interior wooden surfaces.
The product partially penetrates the timber and creates a water- and dirt-resistant finish without concealing the wood’s natural character. Its microporous structure remains moisture regulating and will not crack, peel, flake or blister when correctly applied.
Once completely dried, Osmo TopOil is suitable for wooden surfaces that may come into direct contact with food. It can therefore also be used on wooden serving boards, dining boards and chopping boards.
Available Osmo TopOil colours
Select the required finish above:
-
3028 Clear Satin: intensifies the natural wood colour with a subtle satin sheen
-
3058 Clear Matt: intensifies the wood colour while retaining a matt appearance
-
3061 Acacia Matt: lightly pigmented with a warm transparent acacia tone
-
3068 Natural Matt: lightly white pigmented to retain the untreated appearance of light-coloured timber
-
3037 White Satin: transparent white finish creating a subtle whitewashed appearance
-
3038 Terra Satin: warm, transparent reddish-brown colour
-
3039 Graphite Satin: dark, transparent graphite effect
Clear oils intensify the wood’s natural colour and create a permanent wet-look effect. TopOil 3068 Natural contains a small amount of white pigment to reduce this effect on light-coloured timber.
On dark or reddish wood species, 3068 Natural may appear as a pale chalky haze. Always produce a test area using the same wood species and sanding sequence as the finished workpiece.
Benefits of Osmo TopOil
-
Designed for wooden kitchen worktops, tables and furniture
-
Suitable for surfaces in contact with food once dry
-
Based on natural plant oils and waxes
-
Water and dirt resistant
-
Durable protection for frequently used surfaces
-
Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water
-
Retains the visible wood grain
-
Microporous and moisture regulating
-
Will not crack, peel, flake or blister
-
Localised areas can be repaired
-
Easy to maintain and recoat
-
Suitable for solid wood, edge-glued timber, OSB and cork
-
Coverage of approximately 24 m² per litre per coat
-
Container size: 0.5 litre
Suitable applications
Osmo TopOil is suitable for:
-
Wooden kitchen worktops
-
Wooden tables and desks
-
Dining tables and coffee tables
-
Wooden furniture and cabinets
-
Shelving
-
Wooden serving boards
-
Chopping and dining boards
-
Solid and edge-glued timber
-
Interior OSB and cork
TopOil is not intended for lacquered, plastic or unsuitable veneered worktops. Existing paint, varnish and lacquer coatings must be removed completely.
Surface preparation
The wood must be clean, dry, frost-free and free from dust, grease, silicone, wax and sealed coatings. The moisture content of the timber must not exceed 18%.
Completely remove old paint and lacquer. Carefully clean existing microporous oil finishes. Fill small cracks or damaged areas with a suitable wood filler where required.
Sand new or completely stripped worktops evenly. For wooden worktops, finish at approximately P120–P150. Excessively fine sanding can reduce the amount of oil absorbed by the timber.
Remove all sanding dust with a vacuum cleaner and clean dust cloth. Always complete a test area because the timber species, sanding sequence and selected colour strongly influence the final appearance.
Applying Osmo TopOil
Shake or stir the product extremely thoroughly before and during application. Pigments in the Natural and coloured finishes must be distributed completely and evenly.
Apply the first coat thinly and evenly in the direction of the wood grain. Use one of our specialist lacquer rollers, professional brushes or application pads shown with the related products below.
Spread the oil carefully and avoid heavy applications, overlaps and puddles. Do not completely wipe away the first coat with a cloth; the surface must remain evenly and thinly coated.
Allow the first coat to dry completely:
-
Clear TopOil 3028 and 3058: approximately 8–10 hours
-
TopOil Natural and coloured finishes: allow up to approximately 24 hours
Provide good ventilation throughout the drying process.
Apply the second coat very thinly using a suitable application pad, applicator fleece or clean lint-free cotton cloth. Remove unevenly distributed oil and visible accumulations of pigment before the surface begins to dry.
Two even coats are necessary on bare wooden kitchen worktops and other surfaces regularly exposed to water or food.
Use our rollers, brushes and cloths
Correct film thickness and even distribution are essential for the protection and appearance of the worktop. Use the professional lacquer rollers, brushes, application pads and cotton cloths selected below this product.
An unsuitable foam roller, coarse general-purpose brush or lint-producing cloth can cause marks, loose fibres, colour differences and uneven protection.
We recommend applying the first coat with a suitable lacquer roller or professional brush. The second coat can be distributed very thinly with an applicator pad or lint-free cotton cloth.
Drying and curing
Under normal conditions, the clear finishes can be recoated after approximately 8–10 hours. Pigmented colours and TopOil 3068 Natural may require considerably longer.
Low temperatures, high humidity, inadequate ventilation and excessive application will extend the drying time.
Treat the surface carefully during the first few days. Osmo TopOil takes approximately two to three weeks to cure completely. During this period, avoid prolonged contact with water, do not cover the surface with non-breathable materials and wipe away spills immediately.
Do not use a newly treated chopping or serving surface for direct food contact until the finish is completely dry and cured.
Coverage
One litre of Osmo TopOil covers approximately 24 m² of smooth, planed timber with one thin coat. A 0.5-litre container therefore provides theoretical coverage of approximately 12 m² per coat.
As untreated wood requires two coats, 0.5 litre will treat approximately 6 m² with the complete two-coat system. Actual coverage depends on the timber species, absorption, sanding and application method.
Special timber species
TopOil is suitable for many common woods, including oak, beech, ash, pine, spruce, birch, larch and Douglas fir.
Dark, oily or extractive-rich woods such as teak, iroko, mahogany, wenge, merbau and jatoba can affect the absorption and drying of TopOil. A specialist thin finish may be more suitable for these timber species.
Always produce a test area when treating unfamiliar or tropical woods.
Cabinet interiors and drawers
Apply a maximum of one extremely thin cloth coat inside enclosed cabinets and drawers. Provide extended ventilation before closing or using the cabinet.
Cleaning and maintenance
Remove crumbs, dust and loose dirt with a soft cloth. Use our Eco Multi Cleaner Spray for normal hygienic cleaning. Spray the cleaner onto the cloth rather than soaking the wooden surface.
Do not use aggressive multi-purpose cleaners, bleach, abrasives, baking soda or strongly degreasing detergents. These can damage or discolour the protective finish.
When the surface begins to appear dull or dry, clean it carefully and allow it to dry completely. Apply one extremely thin maintenance coat of TopOil using an applicator pad or lint-free cotton cloth.
Always use the same TopOil colour that was originally applied.
Important safety information
Provide sufficient ventilation during application and drying. Keep the product out of the reach of children and follow the safety instructions on the container.
Cloths, pads and other materials containing liquid oil residue can generate heat and self-ignite. Immediately spread used materials outside to dry completely or store them under water inside a sealed metal container.
Technical information
| Brand | Osmo |
| Article code | 11361 |
| EAN | 4006850118823 |
average of 5 review(s)
na advies van hardwaxstore hebben wij de 3068 gebruikt en dit is prachtig geworden, onze nieuwe eiken tafel is heel mooi licht gebleven dus dikke duim
topoil is top ben er erg blij mee.
heel fijn voor mijn keuken en tafels, wel goed laten drogen 2 weken ofzo.
heel mooi product is makkelijk aan te brengen en beschermd heel goed, ook hier zeer snel en netjes geleverd
goed product werkt perfect op al onze meubels, is ook altijd zeer snel in huis. dus zeer tevreden!