One Coat Only HS Plus for exterior wood – translucent matt oil-based stain requiring one coat
(excl. btw €41,28)
Osmo One Coat Only HS Plus colours and protects exterior wood with one thin coat. A translucent matt oil-based stain that keeps the grain visible. Water-repellent and microporous, without added biocides or preservatives.
- Sterkste beits op de markt
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen met Klarna
- More information? Contact us about this product
Osmo One Coat Only HS Plus
Osmo One Coat Only HS Plus is a translucent oil-based stain for exterior wood. Its high solids content means that only one thin coat is required. The matt finish adds colour while keeping the natural wood grain visible.
The microporous finish repels water and reduces wood swelling and shrinkage. The formula contains no added biocides or preservatives.
Applications
Suitable for timber cladding, carports, fences, pergolas, wooden balcony components, garden sheds and garden furniture. It can also renew suitable existing microporous finishes.
Colours and colour codes
The current manufacturer’s colour chart lists:
-
9203 Basalt Grey (delivery in 1 or 2 weeks)
-
9205 Patina (delivery in 1 or 2 weeks)
-
9206 Light Oak (delivery in 1 or 2 weeks)
-
9207 Quartz Grey (delivery in 1 or 2 weeks)
-
9211 White Spruce
-
9212 Silver Poplar
-
9221 Pine
-
9235 Red Cedar
-
9236 Larch
-
9241 Oak
-
9261 Walnut
-
9262 Teak
-
9264 Rosewood
-
9271 Ebony
Our selection menu also includes the older colours 9232 Mahogany, 9233 Hemlock, 9234 Scandinavian Red and 9242 Fir Green. Check the menu for the colour and pack-size combinations offered.
Wood species and surface condition influence the final colour. Always test first. Light translucent colours provide less UV protection and are less suitable for surfaces exposed to strong sunlight.
Application
-
Ensure the wood is clean, dry and frost-free, with a maximum moisture content of 20%.
-
Remove old paint and varnish. Thoroughly clean suitable existing microporous finishes.
-
Stir well and use without thinning.
-
Apply one thin, even coat along the grain with a suitable brush or microfibre roller.
-
Spread carefully and allow approximately 12 hours to dry with good ventilation.
Low temperatures and high humidity extend drying times. Excessive application may cause glossy patches.
Coverage and pack sizes
Approximate coverage is 26 m² per litre with one coat on smooth wood. Rough or highly absorbent surfaces require more product.
Pack sizes listed in our selection menu: 0.75 litre, 2.5 litres and 25 litres. Availability may vary by colour and size.
Safe use
Read the label and Safety Data Sheet before use. Oil-soaked cloths may self-ignite through heat build-up; handle them according to the safety instructions.
Technical information
| Brand | Osmo |
| Article code | 11386 |
| EAN | 4006850820870 |