Osmo Decking Oil for Exterior Wood – Select Colour and Size

Sale
€31,95
€45,00
(incl. btw)
(excl. btw €26,41)

Osmo Decking-Oil is a satin, transparent exterior finish based on natural plant oils. For wooden decking, garden furniture and fencing. Available in various colours and container sizes.

  • Beste houtolie in 10 verschillende kleuren
In stock
Delivery next day from 8.00 o'clock
Quantity
- +
  • Ordered before 17:00:00, delivered tomorrow
  • Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
  • Kies zelf uw verzendwijze.
  • Achteraf betalen met Klarna
  • More information? Contact us about this product
Product description

Osmo Decking Oil for decking and exterior wood

Osmo Decking Oil is a transparent satin wood finish based on natural plant oils. It is designed for wooden decking, garden furniture, fences and other exterior wooden surfaces where the natural grain and character of the wood should remain visible.

The oil penetrates the wood while retaining a microporous, breathable surface. This helps regulate moisture and reduces excessive swelling and shrinkage. The finish makes the wood water and dirt repellent and will not crack, peel, flake or blister.

Select the required colour and available container size at the top of this product page.

Suitable applications and wood species

Osmo Decking Oil can be used for:

  • Wooden decking and terraces

  • Garden furniture

  • Fences and privacy screens

  • Canopies and other exterior wood

  • Douglas fir and larch

  • Bangkirai and Garapa

  • Massaranduba

  • Teak and eucalyptus

  • Thermally modified wood

  • Oak, cedar and spruce

  • Suitable pressure-treated timber

The final colour is influenced by the wood species, its natural colour, the condition of the surface and the number of coats applied. Always carry out a trial application first.

Benefits of Osmo Decking Oil

  • Transparent satin finish

  • Retains the natural wood grain

  • Highly water and dirt repellent

  • Microporous and breathable

  • Helps reduce excessive swelling and shrinkage

  • Will not crack, peel, flake or blister

  • Easy to maintain locally

  • An intact finish can normally be refreshed without completely sanding the wood

  • Based on natural plant oils

  • Easy to apply thinly and evenly

  • Safe for humans, animals and plants once dry

  • Approximately 24 m² coverage per litre with one coat on smooth wood

  • Approximately 12 hours drying time per coat

Available colours

The official standard colour range includes:

  • 004 Douglas Fir: transparent colour for Douglas fir and similar timber

  • 006 Bangkirai: warm natural shade for Bangkirai and comparable woods

  • 007 Teak Clear: clear finish that enhances the natural colour of the wood

  • 009 Larch: transparent natural shade for larch

  • 010 Thermowood: designed to complement thermally modified wood

  • 013 Garapa: warm natural shade for Garapa

  • 014 Massaranduba: transparent shade for Massaranduba

  • 016 Bangkirai Dark: darker finish for Bangkirai and other hardwoods

  • 019 Grey: transparent grey appearance

  • 021 Bog Oak: dark brown wood shade

A colour name indicates the wood species with which the shade generally coordinates. It does not mean that the colour can only be applied to that particular wood species.

Important information about 007 Teak Clear

Osmo Decking Oil 007 Teak is a clear finish. It enhances the natural colour and grain but does not contain sufficient pigmentation to prevent natural greying caused by ultraviolet light.

Wood treated with 007 Teak Clear may therefore grey naturally over time. Choose a pigmented shade when retaining the original appearance and slowing visible greying are important.

Darker and more heavily pigmented colours generally offer greater protection against visible greying than clear or very lightly pigmented finishes.

Preparing new exterior wood

The wooden surface must be clean, dry, frost-free and free from dust, grease, algae and old closed-film coatings. The moisture content of the wood must not exceed 20%.

Wood species containing high levels of natural extractives must be allowed to weather sufficiently before treatment:

  • Timber rich in natural extractives: weather for at least four weeks or degrease thoroughly

  • Douglas fir and larch: weather for at least six weeks

  • Fresh pressure-treated wood, Bangkirai, Garapa and Massaranduba: weather for approximately three months

The required weathering period can vary according to the wood species, season and weather conditions. Always ensure that the timber is sufficiently dry and free from problematic extractives.

Where possible, apply the first coat to all sides of new timber before installation. If additional protection against blue stain, rot and insect attack is required, pretreat bare wood with Osmo WR Aqua Wood Impregnation 4008.

Preparing weathered or previously treated wood

Thoroughly clean previously oiled exterior wood before applying a maintenance coat. Remove loose finish, dirt and organic contamination completely.

Treat grey and weathered timber with Osmo Wood Reviver Power Gel before oiling to help restore the original appearance of the wood.

Old microporous oil finishes must be thoroughly cleaned and lightly sanded where necessary. Old varnish, paint and other closed-film coatings must be completely removed before applying Osmo Decking Oil.

Allow the wood to dry completely after cleaning.

Applying Osmo Decking Oil

Osmo Decking Oil is ready to use and must not be diluted. Stir thoroughly before and during use to keep pigments and other ingredients evenly distributed.

Apply a thin and even coat in the direction of the wood grain. For the best result, use the Osmo Decking Brush Set, a suitable decking brush or one of the specialist rollers and brushes shown among the related products below.

The recommended rollers and brushes have been selected to distribute the oil in a controlled, thin layer. An unsuitable coarse brush or paint roller may deposit too much oil and cause streaks, lap marks, uneven sheen or extended drying times.

Work one decking board at a time and maintain a wet edge. Check for drips, excess oil and visible application marks while the finish remains workable.

Number of coats and drying time

Apply two thin coats to bare, untreated wood.

Allow the first coat to dry for approximately 12 hours under normal conditions and ensure good ventilation. Apply the second coat equally thinly.

For maintenance of an existing Osmo Decking Oil finish, one thin coat is normally sufficient, provided that the surface is clean, dry and still intact.

Low temperatures, high humidity, insufficient ventilation and excessive application will significantly extend the drying time.

Finishing with Anti-Slip Decking Oil 430

For a less intense colour and a more slip-resistant decking surface, apply one coat of a pigmented Osmo Decking Oil and, once fully dry, finish with Osmo Anti-Slip Decking Oil 430.

Anti-Slip Decking Oil 430 is designed as the second and final coat over a pigmented Osmo Decking Oil. It must not be used as a stand-alone finish on untreated wood.

This application system does not apply to clear 007 Teak. Apply 007 Teak Clear according to its intended two-coat system.

Coverage

One litre covers approximately 24 m² with one thin coat on smooth, planed or sanded wood.

Actual coverage depends on:

  • Wood species

  • Absorbency and condition of the timber

  • Surface roughness

  • Grooves and ridges in decking boards

  • Application method

  • Applied film thickness

Rough-sawn, ribbed, weathered or highly absorbent wood requires more product.

Maintaining the decking

Inspect heavily used wooden decking at least once a year. Clean the surface and apply a thin maintenance coat as soon as the colour or water-repellent performance begins to deteriorate.

Timely maintenance helps prevent the complete finish from having to be removed. Full sanding is normally unnecessary when the existing microporous Osmo finish remains sound.

Tool cleaning and safety

Clean brushes and rollers immediately after use with Osmo Brush Cleaner and Thinner.

Lay oil-soaked cloths flat outdoors to dry or place them immediately in a suitable airtight metal container. Cloths saturated with oil may generate heat and ignite spontaneously.

Keep out of reach of children. Avoid contact with eyes, skin and clothing. Provide good ventilation during application and drying.

Technical information

 

Product information
Brand Osmo
Article code 12482
EAN 4006850118755
What our customers say

average of 0 review(s)

No reviews found
Read or write a review
al 25 jaar dé grootste Osmo verdeler in de Benelux
Voor 17u besteld is vandaag verzonden met Postnl
Dé Osmo specialist met bijna 50 jaar ervaring !
Gratis thuisbezorgd vanaf € 100,- anders € 6,95
* We'll never share your email with anyone else.
Questions?
Do you have questions ?
My account
You are not logged in. Log in to make use of all the benefits. Or create an account now.
Language
Cart
Your cart is empty
Menu
Search
Search suggestions
No products found...
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »