Brush Cleaner and Thinner 8000 for Brushes, Rollers and Application Tools
(excl. btw €11,53)
Osmo Brush Cleaner and Thinner 8000 removes solvent-based oil and wax residues from brushes, rollers and painting tools. Only thin finishing products when their application instructions specifically permit it.
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen met Klarna
- More information? Contact us about this product
Osmo Brush Cleaner and Thinner 8000
Osmo Brush Cleaner and Thinner 8000 is intended for cleaning brushes, rollers and application tools after using oils, Polyx-Oils, waxes and other compatible solvent-based products.
Its low-aromatic formulation has a milder odour than traditional white spirit and effectively removes fresh finishing residues from brushes, rollers and tools. Cleaning application equipment immediately after use helps keep brushes and rollers in good working condition for longer.
The product can also be used as a thinner, but only when thinning is specifically permitted in the technical instructions for the selected finishing product.
Benefits of Brush Cleaner 8000
-
Suitable for brushes, rollers and application tools
-
Removes fresh oil, wax and Polyx-Oil residues
-
For compatible oil- and solvent-based finishes
-
Low-aromatic and mild in odour
-
Helps extend the usable life of brushes and rollers
-
Suitable for professional and domestic use
-
Can be used as a thinner when specifically permitted
-
Available in 1 and 10 litres
Cleaning brushes and rollers
First remove as much finishing product as possible from the brush or roller. Wipe brushes against the edge of the original container and roll rollers until most of the remaining product has been removed.
Pour a limited quantity of Brush Cleaner 8000 into a suitable solvent-resistant container. Carefully work the brush or roller through the cleaner until the remaining oil or wax residue has loosened.
For heavily contaminated tools, repeat the process with a second clean quantity of cleaner. Do not leave brushes or rollers soaking longer than necessary.
Allow the cleaned tools to dry in a well-ventilated area. Do not store used cleaner or removed finishing residues in an open container.
Using the product as a thinner
Osmo Brush Cleaner 8000 can technically be used as a thinner. Never thin a finishing product without first checking its technical instructions.
Many Osmo products are supplied ready to use and must not be diluted. Only add thinner when the manufacturer’s application instructions specifically permit it.
Incorrect dilution can adversely affect coverage, drying, application and the final protective performance of the finish.
Safe use
Only use the cleaner in a well-ventilated area and avoid breathing vapours. Wear suitable protective gloves and prevent contact with the skin and eyes.
Keep away from heat, sparks and open flames. Do not eat, drink or smoke while using the product. Close the container securely immediately after use.
Important: the product may be fatal if swallowed and allowed to enter the respiratory tract. Do not induce vomiting. Immediately contact a doctor or poison information centre.
Storage and disposal
Store the container securely closed, upright and locked away. Keep out of reach of children.
Never pour unused cleaner or contaminated liquid into a sink, toilet or drain. Dispose of residues as chemical waste in accordance with local regulations. Only completely empty containers should be recycled.
Cloths and other materials containing oil or wax residues can present a risk of self-combustion. Spread used cloths outside to dry or temporarily store them in a suitable airtight metal container.
Technical information and safety
| Brand | Osmo |
| Article code | 11458 |
| EAN | 4006850101900 |