Garden Furniture Maintenance Kit with Wood Reviver Power-Gel and Teak-Oil Spray 008
(excl. btw €33,02)
Osmo Garden Furniture Maintenance Kit with 500 ml Wood Reviver Power-Gel, 400 ml Teak-Oil Spray 008 and accessories. For removing greying and re-oiling teak and other suitable hardwood garden furniture.
- Buy 2 for €39,15 each and save 2%
- Buy 4 for €37,95 each and save 5%
- Buy 8 for €35,96 each and save 10%
- Ordered before 18:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen na 30 dagen met Afterpay
- More information? Contact us about this product
Osmo Garden Furniture Maintenance Kit with Teak-Oil Spray 008
Refresh a weathered wooden table, chair or bench with the Osmo Garden Furniture Maintenance Kit. It combines a treatment for greyed wood with an oil finish, plus accessories for preparing and treating the surface.
This version includes Teak-Oil Spray 008 in a 400 ml aerosol can.
What is included?
-
500 ml Osmo Wood Reviver Power-Gel 6609 to remove the grey patina.
-
400 ml Osmo Teak-Oil Spray 008 Clear to re-oil the wood.
-
A stiff cleaning brush.
-
A 50 mm flat brush.
-
A sanding fleece.
Suitable furniture and finish
Use the kit to refresh teak and other suitable hardwood garden furniture. Osmo recommends Teak-Oil Spray for furniture in covered outdoor areas.
The clear oil provides a water- and dirt-repellent finish while keeping the grain visible. 008 Clear does not protect against UV-induced greying.
Remove old paint and varnish before treatment. Always test both products on an inconspicuous area first.
How to use the kit
-
Remove loose dirt and dampen the greyed wood with water. Protect fittings, plants and sensitive surrounding surfaces.
-
Apply Wood Reviver Power-Gel along the grain. It is ready to use: do not dilute.
-
Leave for approximately 20 minutes, scrub with the stiff brush and rinse thoroughly with plenty of water.
-
Allow the wood to dry completely before oiling. This normally takes around 24–48 hours, with longer drying times in cool or humid conditions.
-
Shake the aerosol well. Spray from approximately 25 cm, work the oil in with a brush and wipe away excess with a cloth.
-
Allow approximately 12 hours to dry with good ventilation. Apply a second coat for an initial treatment. One coat is usually sufficient when refreshing a suitable existing oil finish.
Safe handling
Wear suitable gloves and eye protection when using the wood reviver. The spray is an extremely flammable aerosol: keep it away from heat, sparks and flames. Do not smoke or breathe spray mist.
Use outdoors or in a well-ventilated area. Protect the can from sunlight and temperatures above 50 °C. Oil-soaked cloths can self-ignite: wash them out immediately or store in an airtight container as directed by the manufacturer.
Read the labels and safety data sheets before use.
Technical information
| Brand | Osmo |
| Article code | 11862 |
| EAN | 4006850642229 |