(excl. btw €57,81)
Floorservice Replacement pin-backed pad driver for the Floorboy XL300 and XL450. Designed for compatible 12- and 13-inch buffing, microfibre and floor-maintenance pads.
- Ordered before 17:00:00, delivered tomorrow
- Altijd de laagste prijs (Minimaal 40% korting op de winkelprijs)
- Kies zelf uw verzendwijze.
- Achteraf betalen met Klarna
- More information? Contact us about this product
Pad driver for Floorboy XL300 and XL450
This Floorservice pad driver is suitable for the Floorboy XL300 and Floorboy XL450.
The pad driver connects the floor machine to the selected floor pad. Its special pin-backed surface securely holds compatible buffing pads, polishing pads, microfibre pads and other suitable floor accessories during use.
Important: only required as a replacement
A new Floorboy XL300 or XL450 is supplied with a pad driver as standard.
You therefore do not need to order this separate pad driver with a new machine. It is primarily intended as a replacement when the original driver:
-
Has become damaged
-
Has worn or broken retaining pins
-
No longer holds pads securely
-
Is heavily contaminated with oil, wax or cleaning products
-
No longer runs flat underneath the machine
-
Has been lost
Always check your Floorboy model before ordering.
Suitable floor-maintenance applications
When fitted with the correct pad, the driver can be used for:
-
Working maintenance oil into wooden floors
-
Buffing and removing excess floor oil
-
Applying and polishing maintenance wax
-
Lightly polishing suitable floors
-
Cleaning with a microfibre pad
-
Cleaning with a suitable floor or scrubbing pad
-
Light keying or sanding with suitable abrasive material
The selected pad or abrasive determines the application—not the pad driver itself.
Compatible pads
The pad driver is intended for compatible 12- and 13-inch floor accessories. Our heavy-duty 13-inch pads measure approximately 33 cm and may extend slightly beyond the edge of the driver. This helps protect the edge during use.
Depending on the treatment, suitable options include:
-
White pad: for dry buffing and light polishing
-
Beige pad: for working oils evenly into the surface
-
Red pad: for applying products, keying and light cleaning
-
Green pad: for stronger cleaning of suitable floors
-
Black pad: for heavy cleaning and stripping resistant surfaces
-
Microfibre pad: for damp cleaning
-
Wool pad: for dry polishing and buffing
Always select the pad according to the product, floor finish and intended treatment.
Use with abrasive materials
Suitable sanding discs or mesh abrasives may be used with the pad driver for certain applications.
Never place abrasive material loosely or carelessly underneath the machine. Use a suitable buffer pad where required and ensure the abrasive is flat and exactly centred.
An incorrectly selected, off-centre or overly aggressive abrasive may cause deep scratches, sanding marks and permanent damage. Always test the abrasive on an inconspicuous area first.
Only use materials suitable for the Floorboy, the floor and the intended treatment.
Fitting the pad driver
Switch the Floorboy off and unplug it before fitting or removing the pad driver.
Place the pad driver flat on the floor with the pin-backed side facing down. Position the machine directly above the driver and press it carefully and evenly into the machine attachment.
Check that the driver is secure, flat and correctly centred. Fit the selected pad while the machine remains unplugged.
Do not operate the machine if the pad driver is crooked, loose or incorrectly attached. Incorrect installation can cause excessive vibration and damage the machine, pad or floor.
Fitting a pad
Place the selected pad flat on the floor. Position the Floorboy with its fitted pad driver exactly in the centre of the pad.
Apply light pressure so the pins engage evenly with the pad. Check around the entire circumference that the pad extends evenly and is not folded.
An incorrectly centred pad may cause the machine to jump or operate unevenly.
Removing the pad driver
Always unplug the machine first.
Carefully lay the Floorboy backwards as described in its operating instructions. Keep the machine stable and pull the pad driver evenly out of the machine attachment.
Do not pull one side with excessive force, as this may damage the driver or the machine attachment.
Maintenance
Remove pads immediately after use. Do not leave the Floorboy standing on a wet or contaminated pad.
Remove oil, wax, dirt and cleaning-product residue according to the instructions supplied with the product. Do not use aggressive solvents that may damage the plastic or retaining pins.
Regularly check whether:
-
Retaining pins are worn or broken
-
The plate is cracked or distorted
-
The machine attachment is damaged
-
Pads are still held evenly and securely
-
The driver remains flat during operation
Replace the pad driver if pads no longer remain secure or if the plate is damaged or distorted.
Product specifications
-
Product: pad driver
-
Brand: Floorservice
-
Suitable for: Floorboy XL300 and XL450
-
Pad size: suitable for compatible 12- and 13-inch pads
-
Pad attachment: pin-backed surface
-
Application: securing and driving floor-maintenance pads
-
Quantity: one pad driver
-
HardwaxStore article code: 14558
-
EAN: 8718074979208
-
Floorboy machine, pads and brushes: not included
View the Floorboy XL300 floor machine.
View the Floorboy XL450 floor machine.
| Brand | Tisa Line |
| Article code | 14558 |
| EAN | 8718074979208 |